Trinity Cabinet Refacing logoTrinity Cabinet RefacingTrinity, FL
Menu
hero 1 openai mwfhdutk photo

Trinity Cabinet Refacing

Cabinet Refacing in Trinity, FL

Cabinet refacing in Trinity, FL. New doors, veneer skins, and hardware over your existing boxes. Free estimates, written scope.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Trinity and nearby communities.

Get a free estimate

Tell us about the project and how to reach you.

4.9 / 547 reviews on Google
15+Years local experience
500+Projects completed
Licensed & InsuredFL

Cabinet Refacing

Cabinet Refacing cost Trinity FL: what homeowners should know first

Dated oak doors and worn hinges don't always mean a full teardown. Trinity's kitchens built from the late 1980s onward still carry solid, builder-grade boxes under those tired doors. Refacing those boxes costs less and takes less time than tearing a kitchen out and starting over.

Trinity Cabinet Refacing provides cabinet refacing, door replacement, refinishing, and related upgrades across Trinity and nearby Pasco County. Gulf Coast humidity affects how finishes hold up over years, so material choice matters more here than it does inland. The cost section below breaks down what different scopes typically run.

intro 1 openai mwfha3kf photo

What we do

Cabinet Refacing services

Cabinet Refacing across Trinity and the surrounding area.

Residential Services

Commercial Services

Looking for something else? Browse all services in the menu, or tell us about a custom project.

Why choose us

Why choose Trinity Cabinet Refacing

  • Box condition checked before any quote

    Every estimate starts with a hands-on look at your cabinet boxes, not a guess over the phone.

  • Materials matched to Gulf Coast humidity

    Finish and veneer choices account for the moisture swings that wear down builder-grade boxes.

  • Written scope before work starts

    You see door count, material, and hardware in writing before any demo begins.

  • Local to Trinity and Pasco County

    Trinity Cabinet Refacing works this service radius daily, not as a side stop on a Tampa-wide route.

How it works

How our Cabinet Refacing process works

  1. Initial Consultation photo
    Step 1

    Initial Consultation

    A specialist visits to assess existing cabinetry and discuss style goals.

  2. Measurement & Design photo
    Step 2

    Measurement & Design

    Precise measurements are taken to plan door sizes, finishes, and layout adjustments.

  3. Material Selection photo
    Step 3

    Material Selection

    Homeowners choose from veneers, finishes, and hardware samples for their project.

  4. Surface Preparation photo
    Step 4

    Surface Preparation

    Existing boxes are cleaned, sanded, and repaired to ensure a smooth refacing surface.

  5. Refacing Installation photo
    Step 5

    Refacing Installation

    New veneers, doors, and panels are applied and fitted to the existing cabinet frames.

  6. Final Walkthrough photo
    Step 6

    Final Walkthrough

    A final inspection confirms alignment, finish quality, and functioning hardware before project closeout.

Cost

What does cabinet refacing cost in Trinity, FL?

Refacing almost always costs less than tearing out and replacing cabinets outright. The range below is a starting point, not a fixed quote. Request a free estimate for a number specific to your kitchen or bathroom.

Project typeTypical rangeWhat’s included
Hardware upgrade only$300–$1,200soft-close hinges, slides, and new pulls on existing doors.
Door-only replacement$2,500–$6,000new doors and drawer fronts, boxes untouched.
Refinishing and painting$2,000–$5,500sprayed finish on existing doors and boxes, no new door materials.
Full kitchen reface$6,000–$15,000+veneer on all boxes, new doors, drawer fronts, and hardware.
Vanity reface$1,200–$3,500scaled down version of the above for a bathroom cabinet.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Materials

Materials and methods we use

Material choice matters more in a humid Gulf Coast kitchen than it does inland. Here's what we work with most.

  • Wood Veneer Sheets photo

    Wood Veneer Sheets

    Thin wood veneers go over existing boxes for a natural look that still holds up to Trinity's humidity when properly sealed.

  • Laminate Finishes photo

    Laminate Finishes

    Durable and easy to clean, laminate resists the moisture swings common in older Pasco County kitchens.

  • Solid Wood Doors photo

    Solid Wood Doors

    New solid wood fronts replace tired doors for better durability than particleboard originals.

  • Cabinet Hardware photo

    Cabinet Hardware

    Knobs, pulls, and hinges are picked to match the updated style, finished in metals that won't corrode quickly in coastal air.

  • Soft-Close Hinges photo

    Soft-Close Hinges

    Quiet, controlled closing on every door and drawer, a simple upgrade that pairs well with any reface.

  • Protective Topcoat photo

    Protective Topcoat

    A clear sealant layer guards finished surfaces against daily humidity and wear.

Timeline

How long does cabinet refacing take?

Most projects move through a few clear stages. Timing depends mostly on whether doors are stock or custom-ordered.

  1. 01

    Assessment

    same day
  2. 02

    Material and finish selection

    1–2 days
  3. 03

    Custom door lead time

    2–4 weeks
  4. 04

    Install

    2–5 days

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits, codes, and compliance for cabinet refacing

Confirm specifics with the Pasco County building department before work starts, especially if your project includes more than cosmetic cabinet changes.

Typically needs a permitOften no permit
Relocating plumbing lines as part of a larger kitchen remodelDoor and drawer front replacement
Moving or adding electrical outlets tied to new appliancesVeneer or laminate resurfacing of existing boxes
Structural changesHardware swaps and soft-close upgrades
like removing a wallCosmetic painting or refinishing of doors and boxes
bundled into the same project—

DIY vs pro

DIY vs hiring a cabinet refacing pro

DIYHire a pro
A single hardware swap or new pulls on one or two cabinetsFull veneer work, where humidity can cause bubbling without the right adhesive
A small touch-up repaint on a low-traffic piece, like a laundry room cabinetDoor alignment across an entire kitchen's worth of cabinets
—Spray finishing, which needs the right equipment for even, streak-free coverage

When to call

When to call for cabinet refacing

Call (727) 339-5553 or request a free estimate to talk through what you're seeing.

  • Thermofoil doors are bubbling or peeling at the edges
  • Cabinet boxes feel swollen or soft near the sink or dishwasher
  • Your kitchen's finish and hardware look stuck in an earlier decade
  • Hinges are loose, broken, or doors no longer close flush
  • You're planning to sell and want a resale-ready kitchen update

Where we work

Serving Trinity and nearby communities

Local pages for these communities. Nearby towns without a page are still in our service area.

Service coverage Linked names open a local page. Other names are in the service area. Keystone, FL East Lake, FL Palm Harbor, FL Tarpon Springs, FL Westchase, FL Cheval, FL Trinity, FL Holiday, FL Odessa, FL New Port Richey, FL New Port Richey East, FL Elfers, FL Beacon Square, FL Key Vista, FL N Boundary data © OpenStreetMap contributors · ODbL
Linked names open a local page. Other names are in the service area. Confirm availability for a specific address.

Before & after

  • gallery ba 1 before photo
    Before
  • gallery ba 1 after photo
    After

Customer feedback

What local customers say

  • Lisa H.

    4 weeks ago

    5 out of 5 stars

    Called Trinity Cabinet Refacing after a neighbor tip in Trinity. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our kitchen island refacing.

    Trinity, FL

  • Matthew R.

    1 week ago

    5 out of 5 stars

    Honestly did not expect such a professional team. They showed up on time, explained every step, and the custom cabinet doors turned out better than I pictured.

    Fox Wood, FL

  • James G.

    5 days ago

    5 out of 5 stars

    Price was way more affordable than the other quotes we got for hardware & hinge upgrades. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.

    Thousand Oaks, FL

Common questions

Cabinet Refacing FAQs

How much does it cost to redo cabinets?

Redoing cabinets through refacing typically runs less than a full replacement since the boxes stay put. Cost depends on door count, material grade, and hardware. A free estimate gives you a real number for your kitchen.

Do you need a permit to remodel a kitchen in Florida?

Cosmetic kitchen work like cabinet refacing usually does not need a permit in Florida. Permits come into play if you move plumbing, electrical, or load-bearing walls as part of a bigger remodel.

What kitchen cabinet colors will look outdated in 2026?

Heavy orange-toned oak stains and glossy builder-white finishes are starting to read as dated. Warmer neutrals, two-tone combos, and matte painted shaker doors are holding up better.

How much does cabinet refacing cost in Trinity?

Most Trinity refacing jobs land between a few thousand dollars for door-only swaps and the higher end for a full kitchen with veneer and hardware. See the cost breakdown below, then request a free estimate for your exact kitchen.

How long does cabinet refacing take?

A standard kitchen reface runs a few days once materials are on hand, though custom door orders add lead time upfront. Smaller jobs, like a single vanity, often wrap faster.

Do I need a permit for cabinet refacing?

No, refacing itself is surface-level work: new doors, veneer skins, and hardware over boxes that stay in place. It's generally permit-free in Pasco County, though it's worth a quick check if your project includes other changes.

Is DIY cabinet refacing a good idea?

DIY works fine for a single hardware swap or small touch-up. A full kitchen reface involves veneer adhesion, door alignment, and humidity-aware prep, which is where a pro usually saves money and rework.

Ready for a clear estimate?

Tell us about the project, or call to talk through options in Trinity.

Call (727) 339-5553